Format and circular saws

SPECIFICATIONS 230V ~ 50Hz Power: 1500W speed without load: 4500 / min disc 210x 30mm x 24T Net Weight: 9,7kg Sound pressure level Lpa: 93,6dB KpA = 3 dB power level LWA: 106,6dB KpA = 3 dB vibration emission: ah = 4.58 m / s2 K + 1.5m / s2 angles table saws: 0 to 45 degrees left and right cuts...

Zāģis 210mm

SPECIFICATIONS 230V ~ 50Hz Power: 1500W speed without load: 4500 / min disc 210x 30mm x 24T Net Weight: 9,7kg Sound pressure level Lpa: 93,6dB KpA = 3 dB power level LWA: 106,6dB KpA = 3 dB vibration emission: ah = 4.58 m / s2 K + 1.5m / s2 angles table saws: 0 to 45 degrees left and right cuts diagonal: 0 to 45 in the left straight cut at 0 x 0 degrees: 21 x 7cm Cutting miter at 0 degrees x 45 14.7 x 7cm cut oblique at 0 degrees 45 x 21 x 3.5cm Compound miter cut at 45 x 45 degrees: 14.7 x
Format and circular saws - Zāģis 210mm
169.00 EUR
In stock

Zāģis 255mm

TECHNICAL DATA Cutting parameters: 0 x 0 305x75 mm 45 x 210x75 mm 0 0 305x40 x 45 mm 45 x 45 210x40 mm Number of revolutions without load 5000rpm Nominal power 1800 W Diameter 30 mm Saw blade diameter 255 mm Max. cutting range 305x75 mm Voltage 230 V
Format and circular saws - Zāģis 255mm
211.00 EUR
In stock

Zāģis 305mm

TECHNICAL DATA Parametry cięcia: 0 x 0 340x104 mm 45 x 0 240x104 mm 0 x 45 340x55 mm 45 x 45 240x55 mm 0 x 45R 340x40 mm 45 x 45R 240x40 mm Liczba obrotów bez obciążenia 4500 rpm Moc nominalna 2000 W Średnica otworu piły 30 mm Średnica tarczy 305 mm Maks. zakres cięcia 340x104 mm Napięcie 230 V Waga: 20,5kg Wskaźnik laserowy INCLUDED vice Enlargement working table Parallel guide Dust bag Shield 305x30mm - 40 T
Format and circular saws - Zāģis 305mm
352.00 EUR
In stock

KGZ 305 E

Format and circular saws - KGZ 305 E
379.73 EUR
In stock

Mitre saw KG 305 N

Technical data Convincing arguments: Sawblade diameter x bore 305 x 30 mm Ideal for cutting of wood, plastics and non-ferrous metals No load speed 4200 rpm Precise double column guide for smooth and even travel Cutting range:   Powerful motor for best results even at long operations Straight cuts at 90° / 90° 430 x 102 mm Complete with HM-sawblade (60 T) for high quality cutting and burr-free results Mitre cuts at 45° right / left 300 x 102 mm Table extensions on both sides for optimal
Format and circular saws - Mitre saw KG 305 N
430.00 EUR
In stock

Double miter saw ZKG 255 D

Technical data Convincing arguments: Sawblade diameter x bore 255 x 30 mm Suitable for cutting wood, coated panels, plastics and non-ferrous metals No load speed 4800 rpm Complete with linear laser device to show exact position of sawblade Cutting capacity:   Precise double column guide for smooth and even travel Straight cuts at 0° / 0° 340 x 75 mm Powerful motor for top results even at unusually long operations Mitre cuts at 45° right / left 240 x 75 mm Table extensions on both sides
Format and circular saws - Double miter saw ZKG 255 D
445.00 EUR
In stock

Double miter saw ZKG 305 D

Technical data Convincing arguments: Sawblade diameter x bore 305 x 25,4 mm Suitable for cutting wood, coated panels, plastics and non-ferrous metals No load speed 4800 rpm Complete with linear laser device to show exact position of sawblade Cutting capacity:   Powerful motor for top results even at unusually long operations Straight cuts at 0° / 0° 340 x 95 mm Table extensions on both sides ensures optimal workpiece support Mitre cuts at 45° right / left 240 x 95 mm Includes integrated
Format and circular saws - Double miter saw ZKG 305 D
470.00 EUR
In stock

Compound miter saw TMS 305 G

Technical data Convincing arguments: Sawblade diameter x bore 305 x 25,4 mm Steplessly adjustable sawblade when used as table circular saw No load speed 2850 rpm Low machine weight makes it easy to transport and ideal for moving around building sites Table size 350 x 480 mm Mitre saw   Quick conversion from compound to table saw Straight saw 90° / 90° 160 x 95 mm Model TMS 305 G features a smooth running, powerful, maintenance-free inducion moto Mitre cuts at 45° right / left 110 x 95 mm
Format and circular saws - Compound miter saw TMS 305 G
508.00 EUR
In stock

FKS 1500 Sliding table saw - 400 V

Technical data   Standard accessories: Table size 650 x 300 mm Carbide Sawblade 254 x 2,8 x 30 mm / T 24 Sliding table 1500 x 210 mm Sawblade cover with dust extraction outlet Cutting length 1740 mm Connector tube with Y-piece Max. sawblade diameter 254 mm Excentric holder Max. cutting height 90° / 45° 70 / 50 mm Mitre fence Cutting width on rip fence 610 mm End stop Table height 880 mm Table extension Table extension 400 x 280 mm Table enlarging Table enlarging 650 x 350 mm Extractable
Format and circular saws - FKS 1500 Sliding table saw - 400 V
1796.00 EUR
In stock

FKS 1250 N Sliding table saw - 230 V

Technical data   Standard accessories: Table size 800 x 350 mm Carbide sawblade 254 x 3 x 30 mm / T36 Sliding table size 1320 x 240 mm Protective sawblade cover with dust outlet Cutting length 1250 mm Connector hose includin Y-piece Max. sawblade diameter 254 mm End stop Max. cutting height 90° / 45° 80 / 54 mm Table extension Cutting width on rip fence 610 mm Table enlarging Table height 860 mm Telescopic fence Table extansion 350 x 410 mm Stop Table enlarging 800 x 270 mm Square table
Format and circular saws - FKS 1250 N Sliding table saw - 230 V
2037.00 EUR
In stock

FKS 1250 N Sliding table saw - 400 V

Technical data   Standard accessories Table size 800 x 350 mm Carbide sawblade 254 x 3 x 30 mm / T36 Sliding table size 1320 x 240 mm Protective sawblade cover with dust outlet Cutting length 1250 mm Connector hose includin Y-piece Max. sawblade diameter 254 mm End stop Max. cutting height 90° / 45° 80 / 54 mm Table extension Cutting width on rip fence 610 mm Table enlarging Table height 860 mm Telescopic fence Table extansion 350 x 410 mm Stop Table enlarging 800 x 270 mm Square table Square
Format and circular saws - FKS 1250 N Sliding table saw - 400 V
2037.00 EUR
In stock

FKS 1600 N Sliding table saw - 230 V

Technical data   Standard accessories Table size 800 x 350 mm Carbide sawblade 254 x 3 x 30 mm / T36 Sliding table size 1610 x 240 mm Protective sawblade cover with dust outlet Cutting length 1600 mm Connector hose includin Y-piece Max. sawblade diameter 254 mm End stop Max. cutting height 90° / 45° 80 / 54 mm Table extension Cutting width on rip fence 610 mm Table enlarging Table height 860 mm Telescopic fence Table extansion 350 x 410 mm Stop Table enlarging 800 x 270 mm Square table Square
Format and circular saws - FKS 1600 N Sliding table saw - 230 V
2090.00 EUR
In stock

FKS 1600 N Sliding table saw - 400 V

Technical data   Standard accessories Table size 800 x 350 mm Carbide sawblade 254 x 3 x 30 mm / T36 Sliding table size 1610 x 240 mm Protective sawblade cover with dust outlet Cutting length 1600 mm Connector hose includin Y-piece Max. sawblade diameter 254 mm End stop Max. cutting height 90° / 45° 80 / 54 mm Table extension Cutting width on rip fence 610 mm Table enlarging Table height 860 mm Telescopic fence Table extansion 350 x 410 mm Stop Table enlarging 800 x 270 mm Square table Square
Format and circular saws - FKS 1600 N Sliding table saw - 400 V
2297.00 EUR
In stock

Format saw STS 1600 - 400 V

Tehniskie dati   Darba galda izmērs 760 x 350 mm Slidoša galda izmērs 1600 x 240 mm Griezuma garums 1600 mm Maks. Žāģa diametrs 315 x 30 mm Griezuma dziļums pie 90° / 45° 100 / 75 mm Griezuma biezums 900 mm Galda augstums 870 mm Galda palielinājums 500 x 350 mm Ātrums 4250 apgr./min. Putekļu nosūkšanas izeja 100 mm Jauda 2,2 kW Svars  204 kg
Format and circular saws - Format saw STS 1600 - 400 V
2673.00 EUR
In stock

Format saw TK 315 F / 1600 - 400 V

  Technical data Convincing arguments:  Table size 825 x 800 mm Important feature: Sawblade diameter 315 mm can be used when scoring unit is mounted Sliding table 1600 x 270 mm Cutting length 1600 mm Solid square table with roller and telescopic arm guarantee high stability Max. sawblade diameter 315 x 30 mm Anodized aluminium sliding table available in two lengths Max. cutting height 90° / 45° 100 / 80 mm Powerful drive motor for constant cutting speed, even at cutting height of 100 mm
Format and circular saws - Format saw TK 315 F / 1600 - 400 V
2988.00 EUR
In stock

Format saw TK 315 F / 2000 - 230 V

  Technical data Convincing arguments:  Table size 825 x 800 mm Important feature: Sawblade diameter 315 mm can be used when scoring unit is mounted Sliding table 2000 x 270 mm Cutting length 2000 mm Solid square table with roller and telescopic arm guarantee high stability Max. sawblade diameter 315 x 30 mm Anodized aluminium sliding table available in two lengths Max. cutting height 90° / 45° 100 / 80 mm Powerful drive motor for constant cutting speed, even at cutting height of 100 mm
Format and circular saws - Format saw TK 315 F / 2000 - 230 V
3084.00 EUR
In stock

Format saw TK 315 F / 2000 - 400 V

  Technical data Convincing arguments:  Table size 825 x 800 mm Important feature: Sawblade diameter 315 mm can be used when scoring unit is mounted Sliding table 2000 x 270 mm Cutting length 2000 mm Solid square table with roller and telescopic arm guarantee high stability Max. sawblade diameter 315 x 30 mm Anodized aluminium sliding table available in two lengths Max. cutting height 90° / 45° 100 / 80 mm Powerful drive motor for constant cutting speed, even at cutting height of 100 mm
Format and circular saws - Format saw TK 315 F / 2000 - 400 V
3084.00 EUR
In stock

Basic 2000 Sliding table saw

Technical data   Convincing arguments: Table dimensions 800 x 380 mm Aluminium sliding table with hardened guides Sliding table 2000 x 270 mm Solid square table for machining of large and heavy panels Cutting length 2000 mm Serially equipped table extension in length and width allow support of oversize panels Max. sawblade diameter 315 x 30 mm Max. cutting height 90° / 45° 100 / 80 mm Mitre fence and holding device can be positioned at any cutting length Cutting width on rip fence 1180 mm
Format and circular saws - Basic 2000 Sliding table saw
3448.00 EUR
In stock